|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Milling |
Home >
Milling > HIGH PERFORMANCE > CARBIDEL > GRAPHITE
|
 |
|
|
|
|
2 FLUTE LONG LENGTH BALL NOSE (EI971)
|
|
|
|
|
|
|
|
 2 FLUTE LONG LENGTH BALL NOSE |
| Radius of |
Mill |
Shank |
Length |
Length |
Overall |
Neck |
EDP NO |
| Ball Nose |
Diameter |
Diameter |
of Cut |
Below Shank |
Length |
Diameter |
| R.0391 | 5/64 | 1/8 | 3/8 | 3/4 | 3-1/4 | 0.076 | 99671 |
| R 1/16 | 1/8 | 1/8 | 5/8 | 1 | 3-1/4 | 0.120 | 99672 |
| R 3/32 | 3/16 | 3/16 | 1-1/8 | 2 | 4 | 0.182 | 99973 |
| R 3/32 | 3/16 | 1/4 | 1-1/8 | 2 | 4 | 0.185 | 99673 |
| R 1/8 | 1/4 | 1/4 | 1-1/8 | 2 | 4 | 0.230 | 99674 |
| R 5/32 | 5/16 | 5/16 | 1-1/2 | 2-3/8 | 4-1/2 | 0.293 | 99675 |
| R 3/16 | 3/8 | 3/8 | 2 | 2-3/4 | 4-3/4 | 0.355 | 99676 |
| R1/4 | 1/2 | 1/2 | 2-1/8 | 3 | 5-1/8 | 0.480 | 99677 |
|
|
 |
|
